| The Jackite Fiberglass poles were designed with quality and price in mind. Jackite changed the standard for fiberglass poles in three ways:
-
reinforced the butt section so it would not split
-
increased the wall thickness for less breakage, and most important
-
began to provide poles with a thicker tip.
The Jackite Fiberglass poles are telescoping like an antenna. You extend the fiberglass pole out and twist the sections together to the desired length. For a shorter length pole, do not extend all the pole’s sections. All fiberglass poles collapse to 46 inches.
Jackite guarantees all it products for 90-days. But with the Jackite Fiberglass poles if you break a section of this pole Jackite will replace the broken section for a small fee plus freight. For details refer to the shipping and returns page.
How to use:
Attach the base of your pole to a vertical pole or post. (A couple of bungee cords, twine or rope can make this for a temporary display.)
You can drive a wooden stake and tie it off or drive a 36" length of steel re-bar into the ground and leave around 18" exposed. Wrap it with tape to make the edges smooth and protect the pole. Remove the bottom plug from the pole and insert over the re-bar.
Select one of the Jackite ground mounts for a more permanent solution.
There are 2 metal line winder clips on the side of the pole. When Storing the pole with line, collapse the pole and wind the line on the two clips for easy storage.
|
